How to Install Your Outdoor Furniture Covers

Installing your furniture covers is simple, only takes minutes and can protect your furniture from the abuse of the outdoor elements, adding years to the product life. Before putting the protective covers over your furniture you will need to make sure that everything is set up and ready to go.

Clean the Covers

First, take a look at your backyard and focus on trees and on other environmental risks that pose a threat to the products you will be covering. Removing the furniture from an unstable area can save you time, money and, mostly of all, frustration in having to replace expensive pieces. Before installing your outdoor covers, make sure they are clean. This will improve their life expectancy and insure there will be no transfer of dirt or contaminates to your furniture. Note that before storing your protective coverings, they should be cleaned and allowed to dry. This way, when they are ready to use, they will be dirt free.

Clean the Furniture

Second, inspect the items you will be covering for any large debris and remove accordingly. Clean the items per manufacture recommendations. Most outdoor products can be cleaned with warm water and a mild detergent. A patio umbrella is best cleaned when in the open position. Allow all products to dry before moving to the next step.

Inspect

Third, make sure there are no manufacture defects, rips, tears or anything that will allow the elements to reach your furniture. Some warranties are limited to manufacture defects for a specified period of time whereas the higher quality fabrics offer a longer warranty against fading, cracking and deterioration. The warranties vary from manufacturer to manufacturer and is something that should be taken into consideration when looking to make a purchase to protect your investment. Once fully inspected, wither begin the installation or note any defects. Any defects should immediately be noted and communicated with the manufacturer. The inspection process will probably be the most time consuming, but will insure you have products that will properly protect your outdoor items. Check and read any installation guidelines or manuals, as some installation processes may differ slightly.

Install

Fourth, place the entire outdoor furniture cover over the item to be covered. Pull one end downward until it is taut. Then move to the opposite side and repeat the process. Continuing pulling all edges downward until the protective covering fully encases the patio product. To avoid water pooling on your cover it is recommended to put an object such as a beach ball under your cover to create a tent-like effect. This will allow the water to run off, instead of creating a pool that could allow mold and other contaminants to build up. Some new protective furniture covers on the market are DuckCovers that include an inflation balloon to prevent water pooling, a very novel idea to a simple product.

Secure

Lastly, secure with the attached tie downs or Velcro fastening system to create a snug fit and to prevent them from being blown or pulled off by harsh winter weather. After securing your tie downs, it's important to double check that everything has a proper fit. Outdoor furniture covers - https://www.koverroos.com/ are intended to protect against rain, snow and debris that would otherwise end up on your patio furniture. Choosing the proper coverings for your weather conditions and climate will help your outdoor investment stay beautiful for years.